YTC / PRODUCT CENTER
CO₂ Recovery Equipment
Find the equipment by its name and process duty. Review the design inputs, operating interfaces and relevant technical guides before defining a replacement or a new installation.
12 products
CO₂ Recovery Equipment
Named process equipment, from gas collection to analysis and control.
Collection
CO₂ Gas Collection & Buffering ↗
Balance variable source production and plant demand. Define collection pressure, usable buffer capacity and the handling of unsuitable feed.
Flow variation · Buffer volume · Source acceptance
Explore specifications ↗
Pretreatment
Defoaming & CO₂ Washing System ↗
Condition the incoming gas and manage source-relevant carryover before compression. The washing arrangement depends on the contaminants present.
Carryover · Wash duty · Drainage
Explore specifications ↗
Compression
CO₂ Compressor System ↗
Specify compression stages, intercooling and liquid separation around the gas inlet conditions and required downstream pressure.
Gas flow · Pressure ratio · Machine protection
Explore specifications ↗
Drying
CO₂ Adsorption & Drying Unit ↗
Control moisture and selected contaminants through an appropriately specified adsorption arrangement, regeneration cycle and changeover sequence.
Dew point · Regeneration · Bed switching
Explore specifications ↗
Purification
CO₂ Purification & Reboiler Unit ↗
Define purification and refining duties from the inlet contaminants and final trace limits, with a clear measurement and acceptance basis.
Trace removal · Refining · Acceptance testing
Explore specifications ↗
Refrigeration
CO₂ Refrigeration Unit ↗
Match refrigeration duty to liquefaction load, ambient conditions and the selected process. State auxiliary loads and utility boundaries explicitly.
Heat load · Ambient conditions · Utilities
Explore specifications ↗
Liquefaction
CO₂ Liquefaction Unit ↗
Integrate gas condensation, phase separation and downstream liquid handling with the specified feed and operating envelope.
Feed quality · Condensation · Liquid handling
Explore specifications ↗
Quality monitoring
Online CO₂ Analyzer ↗
Choose measurement ranges, sample preparation and calibration requirements around the contaminants that matter to the product specification.
Sample conditioning · Calibration · Measurement range
Explore specifications ↗
Automation
DCS & Process Control System ↗
Coordinate sequencing, interlocks, trends and operator interfaces across the plant, with defined equipment and site integration responsibilities.
Interlocks · Operating sequence · Data history
Explore specifications ↗
Electrical integration
Electrical Control Cabinet ↗
Specify power distribution, motor control, protection and panel documentation for the destination supply and project interfaces.
Electrical supply · Protection · Documentation
Explore specifications ↗
Plant integration
Automation & Quality Monitoring ↗
Connect operating controls and quality measurements with the agreed production and release procedures. Define alarms, records and responsibilities.
Control integration · Quality records · Alarm response
Explore specifications ↗
Purification consumables
Activated Carbon for CO₂ Purification ↗
Select replacement activated-carbon media for an identified CO₂ purification duty, based on the contaminants, operating conditions and existing vessel design.
Media grade · Contaminant duty · Replacement plan
Explore specifications ↗No matching product. Try a broader equipment name, clear your search, or ask our engineers.
NEED HELP CHOOSING?
Start with the gas you have.
Share your gas analysis, flow profile, target product and location. We can help define the process and supply boundaries.